2009 Chrysler Town And Country Oil Type?

Chrysler Town and Country 3.3L / 3.8L 2009, MaxPro™ SAE 5W-20 Synthetic Motor Oil, 1 Quart by Mopar®.

How many quarts does 09 town country take?

Capacity: 5 quarts (with filter)After refill check oil level.

What kind of oil does a 2008 Chrysler Town and Country Touring take?

Mobil 1 Extended Performance Synthetic Motor Oil 5W-20 5 Quart.

What kind of oil goes in a 2010 Chrysler Town and Country?

Chrysler Town and Country 2010, Special Tec™ SAE 5W-20 Full Synthetic Motor Oil, by Liqui Moly®.

How much oil does a 3800 take?

How much oil does a 3800 V6 take? The tools you’ll need include a floor jack, jack stands, a used oil catch container, 4.5 U.S. quarts of new SAE 10W-30 oil, a new oil filter, a 15mm wrench, a funnel, and an oil filter wrench such as the Lisle 63600.

How much oil does a 2010 Chrysler Town and Country 4.0 take?

Capacity: 5.5 quarts (with filter)After refill check oil level.

What kind of oil does a 2000 Chrysler Town and Country take?

Engine Oil SAE 5W-30 is preferred.

You might be interested:  Readers ask: Bmw M6 V10 Specs?

What type of oil does a 2006 Chrysler Town and Country take?

Mobil 1 Extended Performance Synthetic Motor Oil 5W-20 5 Quart.

How do you reset the oil change light on a Chrysler Town and Country?

Chrysler Town & Country: Reset Oil Light

  1. Turn the ignition switch to the ON position without starting the engine.
  2. SLOWLY press the GAS PEDAL all the way down to the floor THREE times within TEN seconds.
  3. Switch the ignition to OFF, then immediately back ON.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top