Bmw 740il Oil Type?

Engine Oil

Viscosity: 5W-30, 0W-30 (All TEMPS)
Capacity: 7.9 quarts. (with filter)After refill check oil level.
Torque: 19 MM PBH – 43-46 ft/lbs (Oil Drain Plug) 17 MM PBH – 22-26 ft/lbs (Oil Drain Plug)

What kind of oil does a 1998 BMW 740iL take?

Valvoline Synthetic Motor Oil 5W-30 1 Quart.

How much oil does a BMW 740i take?

6.9 quarts. (with filter)After refill check oil level. Torque: 18 ft/lbs (Oil Drain Plug) Replace drain plug seal.

Which engine oil is recommended by BMW?

Oil for most BMW passenger vehicles and SAVs: Mobil 1 SAE 0W-40. Valvoline SynPower SAE 5W-30. Castrol Syntec European Formula SAE 0W-30. Beginning in 2015, BMW is recommending Shell/Pennzoil PurePlus Oils as their aftermarket oil.

How much oil does a 2000 BMW 740il take?

7.9 quarts (with filter)After refill check oil level.

How many quarts of oil does a 2006 BMW 750li take?

Engine Oil 8.5 quarts. (with filter)After refill check oil level.

Can I use semi synthetic oil in my BMW?

An oil with 0W-40 specification is designed to operate over a wider ambient temperature range than a 0W-30 oil. Semi-synthetic oils are mixed with mineral oil. BMW only recommends fully synthetic oils for its current models.

You might be interested:  Quick Answer: Tpm Malfunction Bmw 335i?

Can I put 10w40 instead of 5W30?

Your vehicle does not use 5W-30 oil. The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.

How much oil does a n20 engine take?

It should take 7 Quarts.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top