FAQ: 2002 Acura Mdx Maintenance Light Reset?

To reset the 2002 Acura MDX maintenance light, please follow these instructions:

  1. Turn the key to off position.
  2. Press and hold the SELECT and RESET buttons on the instrument panel and turn the ignition to position (II) – do not start the engine.
  3. Hold the SELECT and RESET buttons until the indicator resets.

How do you reset a 2002 Acura MDX?

Reset Acura ECU Turn off the lights and radio. Your Acura dash lights should be on at this point. Within 5 seconds of turning on the ignition, press the gas pedal, and keep it pressed for 30 seconds. Turn the car off and restart it.

What does service due soon B mean?

What it means: A. Replace just the engine oil. B. Replace the engine oil, oil filter, rotate the tires, inspect the front and rear brakes, check the parking brake adjustment, and inspect other items specific to your vehicle.

How do you reset an Acura?

Here are the instructions for doing a transmission reset.

  1. Push the START/STOP button: press it twice without pressing the brake pedal. DO NOT START THE ENGINE.
  2. Your Acura dash lights should be on at this point.
  3. After the transmission has reset, the CEL will go off.
  4. Turn the car off and restart it.

What problems do Acura MDX have?

Misfiring cylinders, failure in the electrical system, excessive oil consumption, and engine failure are some of the Acura MDX problems seen over the years. Most of the transmission issues in the Acura MDX were resolved by 2008, but a few bumps kept resurfacing in the later models.

You might be interested:  Bmw M4 Fuel Economy?

How do you turn off the maintenance required light on a 2004 Acura MDX?

Maint, light

  1. Turn off the engine.
  2. Press and hold the select / reset buttons on the instrument panel, then turn the ignition switch ON (II).
  3. Hold the buttons for at least 10 seconds, until the indicator resets.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top