Quick Answer: Chevrolet Radio Code?

Press the buttons 2 and 3 at the same time and hold for about 10 seconds. Write down the code that displays on the screen. Press the AM/FM button and a new code should populate. Write this number down next to the first set and you’ll now have a six-digit code––a.k.a. the radio’s serial number.

How do I unlock my Chevy radio?

Dial 1-800-537-5140 to connect with GM’s toll-free radio hotline. Once you’re connected, you’ll be asked to provide your vehicle’s radio identification number, along with a special dealer access code. You’ll then be rewarded with a 4-digit retrieval code, which will allow you to unlock your radio.

How do I find my GM radio code?

Step 4: Call the Chevy Radio Code phone line at 1-800-537-5140. Enter 106010 followed by the # key to direct you to the radio code retrieval system.

How do I get the code for my Chevy utility radio?

Now that you have your radio’s serial number, you can obtain the radio unlock code from General Motors. Be ready with a pen and paper to write down your radio unlock code. Step 1: Contact the GM radio hotline. From any landline or cell phone, call the toll-free GM Radio hotline at 1(800) 537-5140.

You might be interested:  Often asked: Is Bmw A Foreign Car?

How do you reset the code on a Chevy utility radio?

How to Reset a GM Radio

  1. Turn on your car.
  2. Press and hold down both the second and third preset buttons.
  3. Write down the two- or three-digit code that appears in the LED display.
  4. Press the AM/FM button on the radio.
  5. Write down the next two- or three-digit code that appears in the LED display.

How do I unlock my radio without the code?

Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio. Press and hold down the audio power button together with the SEEK button for about 50-60 minutes. Then, it will turn on without entering the radio code.

Can I get radio code from VIN number?

The code is located on a card that comes with the original purchase of the vehicle, which we don’t have. A person can call the dealership with the serial number of the radio and Vehicle Identification Number (VIN) of the vehicle and ask for the radio code.

How do I unlock my radio code?

How to Find the Radio Code to Unlock a Car Stereo

  1. Check Your Owner’s Manual. The best place to locate a radio code is in the owner’s manual of your car.
  2. Visit the Manufacturer’s Website.
  3. Visit your Local Dealership.
  4. Contact a Local Automotive Audio Installation Center.

How do I unlock my 2013 GM radio?

To unlock the radio in the 2013 Chevy Silverado You will start by turning on the vehicle. You will see the display indication “LOC” which is telling You the theftlock system is activated. Now press and hold the reset buttons 1 and 4 for ten seconds or 2 and 3 if You radio does not have a fourth preset button.

You might be interested:  Often asked: Bmw M4 Hardtop Convertible Price?

How do I unlock my 2015 Chevy radio?

How to Unlock a Chevy Radio

  1. Start the car and turn on the radio.
  2. Press down on preset numbers two and three until a three-digit number displays on the radio.
  3. Push the AM/FM button and a new three-digit number will display.
  4. Call 1-800-537-5140.
  5. Enter 106010, and then press *.

What are the radio ten codes?

10-Radio Codes

  • 10-1 Receiving Poorly.
  • 10-2 Receiving Well.
  • 10-3 Stop Transmitting.
  • 10-4 Acknowledgement.
  • 10-5 Relay.
  • 10-6 Busy.
  • 10-7 Out of Service.
  • 10-8 In Service.

How do I unlock my GM navigation radio?

How to Unlock GM Navigation Radio System: 3 Main Stages

  1. Step 1: Insert your car key and set its mode to “Accessory” or “On.”
  2. Step 2: Turn on your radio and check that the letters “LOC” are displayed.
  3. Step 3: Locate the preset buttons 1 and 4.
  4. Step 4: Push the AM/FM button to get another three-digit code.

How do you take theft lock off radio?

Cars with PassLock or Theftlock

  1. Use an original key (not a copied one) and insert it into the ignition.
  2. Turn the key into the “On” position.
  3. Leave the key in this position for 10 minutes until the “Theft System” light stops flashing and goes off.
  4. Flip the key into the “Off” position and leave it there for five seconds.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top