Readers ask: Bmw 335i Oil Type 2007?

Engine Oil

Viscosity: 5W-30, 0W-30 (All TEMPS)
Capacity: 6.9 quarts. (with filter)After refill check oil level.
Torque: M12x1.5 – 19 ft/lbs (Oil Drain Plug) M22x1.5 – 45 ft/lbs (Oil Drain Plug) M18x1.5 – 26 ft/lbs (Oil Drain Plug)

What oil does BMW 335i use?

5W-30 Pento High Performance is a fully synthetic high performance engine oil, developed for the most recent vehicles with extended oil service intervals. Pento HP can be used in all gasoline and diesel engines containing turbochargers as well as non-turbocharged vehicles requiring 5W-30.

What kind of oil does a BMW 2007 take?

The 2007 BMW 328i has a 3.0 L 6-cylinder engine that needs SAE 5W-40 FS Synthetic European Motor Oil. The capacity for the vehicle iS6. 9 quarts with a filter.

What kind of oil does a 2008 335i take?

The recommended oil type for a 2008 bmw 335i is synthetic motor oil 5w-30synthetic motor oil 5w-30.

Is 5W 40 oil OK for BMW?

Registered. The Castrol oil that BMW used to spec was midway between a 30 and 40 weight. Anything from 0W30 to 5W40 will be fine if it has the LL-98 or LL-01 rating. You don’t even need that if you are running shorter change intervals.

You might be interested:  Question: 2005 Chevrolet Equinox Lt Mpg?

What is the difference between 5w30 and 5w40?

5w30 is engine oil that has lower viscosity 5 and higher viscosity 30. 5w40 is engine oil that indicates the weight and viscosity of the engine. 5w30 has lower viscosity hence it is suitable to use in hot or lower temperatures. 5w40 has higher viscosity hence it is not suitable at all temperatures.

Is Valvoline good oil?

Is Valvoline Synthetic good oil? Valvoline synthetic oil is an excellent oil as it meets the needs of your engine. It also keeps the performance of your engine at its peak. Also, Valvoline synthetic oil does not dissipate in high temperatures and you can enjoy extended drain intervals.

What engine oil does BMW use?

Most BMW engine comes with a 5W-30 from the factory. BMW also recommends an oil change interval of 15,000 miles. The brands that BMW uses are the Mobil Full Synthetic 5W-30 High Mileage, Mobil 1 SAE 0W-40, Valvoline SynPower SAE 5W-30 or Castrol Syntec European Formula SAE 0W-30.

What oil does e90 take?

Pour in 7 Quarts of 5w-30 Oil.

What kind of oil does a 2008 BMW 328i take?

The 2008 BMW 328i uses SAE 5w-30 full synthetic oil. It has a capacity of 6.5 quarts. Oil keeps the internal parts of Your car’s engine cool and lubricated and it also keeps the moving parts from grinding against each other thereby reducing wear and damage.

What oil does a 2010 BMW 335i take?

Castrol Edge Synthetic Motor Oil 5W-30 1 Quart.

What is 0w40 oil?

CHOOSING the right 0W-40 oil for your car. It actually stands for Winter. That’s because 0W-40 engine oil is formulated to flow like a 0 Weight oil in cold conditions, yet offer the protection of a 40 Weight motor oil when the engine reaches its full operating temperature.

You might be interested:  Often asked: Bmw 7 Series 2014 Configurations?

Can I put 5w40 instead of 5W30?

In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to ambient temperatures of 50°C, as opposed to 30°C.

Can you mix 5W30 and 5w40 BMW?

Yep, you can mix oil types. The usual reason it is discouraged is because it assumes one type must be right, so therefore the other type has to be wrong, but there is no danger of chemical reactions etc.

Can I use 0W40 instead of 5W30?

When it gets hot it’s entirely different, the 5W30 would do a better job because of it’s thick viscosity, it will take more time for it to get thinner than the 0W40 that is thinner. Though both would work very well in Africa, but the 5W30 would do a better job in Africa and the 0W40 will deliver more in Europe.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to Top